TKF-I Serisi Pompa Teknolojileri
Mekanik Markt olarak 7/24 yanınızdayız. Bizimle Whatsapp ile iletişime geçerek ürünlerimiz hakkında detaylı bilgileri alabilirsiniz.
Discharge Flange: DN 65 – DN 250
Flow rate: 500 m³/h
Heading Height: 100 m
Frequency : Three Phase 50 Hz - 60 Hz*
Fluid Temperature: -25 ˚C to +140 ˚C
Maximum Working Pressure: 10 bar (16 bar)*
PUMP DESIGN FEATURES
- Monoblock centrifugal pumps with volute, single-stage, closed impeller, which can be connected to a straight pipe (line type).
-Suction and discharge flanges comply with TS EN 1092 - 2 / PN 16. Flanges in pumps with steel or stainless steel body material comply with TS EN 1092 - 1 / PN 16. Optionally, it can be produced with ANSI/ASME flanges.
-Pumps are used with high efficiency class electric motors in accordance with IEC construction sizes.
-All impellers are dynamically or statically balanced in accordance with ISO 1940 class 6.3.
-Axial force is balanced by the impeller balancing holes system.
-Optionally, the pumps can be manufactured with wear rings and/or shaft bushings.
-The direction of rotation is clockwise when viewed from the motor side.
-The pump shaft is connected to the motor shaft with a plug-in shaft or a rigid coupling, and the axial and radial forces of the pump are covered by the motor bearings.
TKF-I PUMP USAGE AREAS
-Water Treatment and Pressurization
-Heating, Ventilation and Air Conditioning
-Agricultural Irrigation and Drainage
-Food and Beverage Industry
-Marine
-Building Systems
Be the first to review this product!