Stainless Compressor Solenoid Valve – Normally Closed (NC)

Stainless Compressor Solenoid Valves operate with AC and DC electrical energy and provide control of various fluids (air, gas, fuel, steam, water, etc.) and are two or three-way valves. They consist of a body, sleeve, coil, diaphragm and core. Solenoid valves are normally closed (when the coil receives energy, it opens the closed valve) and
It is manufactured in two types: normally open (to close the valve that is open when it receives energy from the coil).

THINGS TO CONSIDER WHEN SELECTING STAINLESS STEEL COMPRESSOR SOLENOID VALVE:
-The coil should be selected according to the operating voltage it will be used in (AC-DC). Protection and insulation should be provided according to the place where it will be applied. (It opens when the electricity comes and returns to the closed position when you cut the electricity)
-Minimum and maximum pressure values in the line or system you will use are very important in selecting the valve.
-The quality and temperature of the fluid are direct factors in the selection of the valve.
-Pay attention to the installation and ensure that the direction of the fluid is in the same direction as the arrow mark on the body.
-Since the solenoid valve does not function as a check valve, the fluid flows back under reverse pressures. In these cases, it is correct to install a check valve after the solenoid valve in terms of connection.
-The line where the valve is installed must be cleared of dirt.

Product CodeSizeConnection Thread FeatureNominal PressureOperating Pressure RangeCoil FeatureFluid Operating Temperature RangeAmbient Operating Temperature RangeWeightFlow DirectionDiaphragm and Seal FeatureResponse TimeKVs(It/min)GEM1110 1/8''BSP, Optional NPT16bar0-50barIP65, Class H, ED 100%-10/180°C-10/60°C0,320kgOne way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:- 10°C/+180°C) Opening Time: 30 ms Closing Time: 30 ms 1.72 GEM1111 1/4''BSP, Optional NPT 16bar0-50bar IP65, Class H, ED 100%-10/180°C-10/60°C0,310kg One way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:-10°C/+180°C) Opening Time: 30 ms Closing Time: 30 ms1,8 GEM1113 1/2''BSP, Optional NPT16bar0.5-30barIP65, Class H, ED 100%-10/180°C-10/60°C0.585kgOne way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:- 10°C/+180°C)Opening Time: 300 msClosing Time: 900 ms75 GEM1114 ¾BSP, Optional NPT16bar0.5-30barIP65, Class H, ED 100%-10/180°C-10/60°C0.635kgOne way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:-10°C/+180°C) Opening Time: 300 ms Closing Time: 900 ms85 GEM1115 1″BSP, Optional NPT 16bar0.5-30barIP65, Class H, ED 100%-10/180°C-10/60°C0.700kgOne way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:-10°C/+180°C)Opening Time: 300 msClosing Time: 900 ms95 GEM1116 11/4″BSP, Optional NPT16bar0.5-30barIP65, Class H, ED 100%-10/180°C-10/60°C1.570kgOne Way(NBR:-10°C /+80°C) , (EPDM:-10°C/+130°C) , (VITON:-10°C/+160°C) , (PFTE:-10°C/+180°C)Opening Time: 300 ms Closing Time: 900 ms