Basınç Düşürücü Kontrol Vanası

Pressure reducing hydraulic control valves are used to reduce the high pressure value in water transmission network lines to a desired lower value. Pressure reducing control valves maintain the set outlet pressure value without being affected by the flow and flow rate changes in the network. Pipe diameter is not taken into consideration when selecting the valve diameter. Valve diameter can be selected as one smaller or larger than the pipe diameter. Cavitation values should be taken into consideration when selecting the valve diameter.

Pressure Reducing Control Valve Features

The pressure reducing hydraulic control valve operates fully automatically with network pressure without the need for external energy.
The 2-way pressure reducing pilot valve used on the control valve reduces the outlet pressure to the desired value without being affected by the flow rate changes in the network.
When the inlet pressure value in the network falls below the desired outlet pressure value, the valve opens itself fully.
In water transmission networks with variable flow rates, it is recommended to connect a pressure reducing control valve with a smaller diameter than the existing pressure reducing control valve to the network as a by-pass line.
When there is no water in the network, the valve automatically closes itself.

You can visit our " Solenoid Valve " page to get more detailed information on the subject or to find solutions to the problems you are experiencing.