LEO AKSM 155A (AE) - 0.2 HP 220V KENDİNDEN EMİŞLİ SÜRTME FANLI HİDROFOR
Self Priming Peripheral Pump AKSm
APPLICATION
It can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
It is suitable for lifting water from the well, sprinkling irrigation of the garden, increasing the pressure of running water and supporting equipment.
Pumpa
-Self-priming Peripheral Pump
- Brass propeller
-Brass pump hood
- AISI 304 mil
-7 Pump start will have a 3 second delay time after plugging in to prevent possible danger due to electric spark
- Automatic pressure sensor inside
- Small flow control system automatically switches in case of small water flow
-Automatically stops for 6 seconds if there is no water inside
-Max. liquid temperature: +40℃
- Max. Suction: 8 m
-Liquid PH value: 6.5- 8.5
Engine
- IE2 engine for energy saving
- C & U bearing
- Copper winding
- Built-in thermal protector for single phase motor
-Insulation class: F
-Power design with low voltage operation 180V- 220V/50Hz
Technical data
MODEL | STRENGTH | Q(m3/h) | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | |
(KW) | (HP) | Q(L/min) | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | |
1.1 | 1.5 | H(m) | 32 | 30 | 26 | 22 | 17 | 12 | 7 | 2 |
Table of Materials
No. | Section | Material |
1 | Base | PP |
2 | Tank | Steel (ST12) |
3 | Wheel | Rice |
4 | Check valve | NBR |
5 | Pump Center Cover | PA66 |
6 | Pump Head | POM |
7 | Circuit board | |
8 | Condenser | |
9 | Terminal box | ABS |
10 | Stator | |
11 | Tailgate | ZL102 |
12 | Fan | PP |
13 | Fan cover | PP |
14 | Housing | PP |
15 | Roller | |
16 | Rotor | |
17 | Mechanical seal | carbon / ceramic |
18 | Pressure Switch | |
19 | Air exhauster | |
20 | Pump hood | Rice |
21 | Pump Body | POM |
It can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
It is suitable for lifting water from the well, sprinkling irrigation of the garden, increasing the pressure of running water and supporting equipment.