Genel Maksat Yüksek Basınç Solenoid Valf – Normalde Açık (GEM YBA)

General Purpose High Pressure Solenoid Valve , operates with AC and DC electrical energy, and is used to measure various fluids (air, gas, fuel, steam, water, etc.) and are two or three-way valves. They consist of a body, a sleeve, a coil, a diaphragm and a core. Solenoid valves are normally closed (to open the closed valve when the coil receives energy) and normally open (to close the open valve when it receives energy from the coil). It is manufactured in two types.

THINGS TO CONSIDER WHEN SELECTING A SOLENOID VALVE:

-The coil is suitable for the operating voltage where it will be used. (AC-DC). Protection and insulation should be provided according to the place of application. (It opens when the electricity comes and returns to the closed position when you cut the electricity.)
-Minimum and maximum pressure values in the line or system you will use are very important in selecting the valve.
-The quality and temperature of the fluid are directly effective in the selection of the valve.

-Pay attention should be paid to the installation so that the direction of the fluid and the arrow mark on the body are in the same direction.
-Since the solenoid valve does not function as a check valve, the fluid flows back under reverse pressures. In these cases, it is correct to install a check valve after the solenoid valve in terms of connection.
-The line to which the valve is installed must be free of dirt.