Genel Maksat Yüksek Basınç Solenoid Valf – Normalde Kapalı (GEMYB)

Solenoid valves operate with AC and DC electrical energy and control various fluids (air, gas, fuel, steam, water, etc.). They are two or three way valves. They consist of a body, a sleeve, a coil, a diaphragm and a core. Solenoid Valves are of two types: normally closed (to open the closed valve when the coil receives energy) and normally open (to close the open valve when it receives energy from the coil). It is manufactured as.

THINGS TO CONSIDER WHEN SELECTING A SOLENOID VALVE:
-The coil should be selected according to the operating voltage it will be used in (AC-DC). Protection and insulation should be provided according to the place where it will be applied. (It opens when the electricity comes and returns to the closed position when you cut the electricity)
-Minimum and maximum pressure values in the line or system you will use are very important in selecting the valve.
-The quality and temperature of the fluid are direct factors in the selection of the valve.
-Pay attention to the installation and ensure that the direction of the fluid is in the same direction as the arrow mark on the body.
-Since the solenoid valve does not function as a check valve, fluid flows back under reverse pressures. In these cases, the solenoid valve
then installing a check valve is correct in terms of connection.
-You must clean the line where the valve is installed from any dirt.