ARS-KC Serisi Pompa Teknolojileri
Mekanik Markt olarak 7/24 yanınızdayız. Bizimle Whatsapp ile iletişime geçerek ürünlerimiz hakkında detaylı bilgileri alabilirsiniz.
Discharge Flange: DN 40 - DN 50
Flow rate: 60 m3/h
Head: 450 m
Frequency: three-phase 50 Hz - 60 Hz
Fluid Temperature: -25 ⁰C to + 140 ⁰C
Maximum Working Pressure: 30 bar (63 bar)*
Flow rate: 60 m3/h
Head: 450 m
Frequency: three-phase 50 Hz - 60 Hz
Fluid Temperature: -25 ⁰C to + 140 ⁰C
Maximum Working Pressure: 30 bar (63 bar)*
PUMP DESIGN FEATURES:
-Horizontal shaft, split body, diffuser, multistage, closed impeller centrifugal pumps.
-2 models from DN 40 to DN 50 discharge flange diameter.
-Bearing life is long in ARS-KC type pumps due to the opposite impeller design.
-Suction flanges comply with TS EN 1092 - 2 / PN 16, discharge flanges comply with TS EN 1092 - 2 / PN 40. (Flanges on pumps with stainless steel body material comply with the relevant pressure class of TS EN 1092 - 1 standard.)
- In standard production, the suction flange is on the coupling side and on the right side, the discharge flange is on the other end and on the top (R 4/2).
-If flange positions are requested outside of standard production, this request must be specified at the time of order.
All impellers are dynamically or statically balanced in accordance with ISO 1940 class 6.3.
-Axial force is balanced by the impeller balancing holes system.
-The direction of rotation is clockwise when viewed from the motor side.
"Grease lubricated" bearings are used as standard in ARS-KC type pumps.
ARS-KC PUMP USAGE AREAS
-Water Treatment and Pressurization
-Heating, Ventilation and Air Conditioning
-Agricultural Irrigation and Drainage
-Power Plants
-Petroleum Industry
-Chemical Industry
-Food and Beverage Industry
-Mining
-Iron and Steel Industry
-Building Systems
-Fire extinguishing
Be the first to review this product!